We have a number of SIMVARs and LVARs we use, which you can use to interact with the SayIntentions.AI world.
L:SIAI_RADIO_PTT
Description: Turns to 1 if COM1 or COM2 is currently transmitting. 0 means the radio is not transmitting.
Settable: Read-Only
L:SIAI_INTERCOM_PTT
Description: Turns to 1 if the intercom PTT button is currently being held down, and 0 otherwise.
Settable: Read-Only
L:SIAI_ATC_MASTER_OFF
Description: Will be set to 1 if the ATC master switch is OFF, and a setting of 0 means that all ATC services are enabled. If ATC services are NOT enabled, the pilot cannot talk to ATC on the radio, but can still talk to non-ATC services, such as ground-crews, FBO, virtual airlines, etc. Note that Entourage customers will be forced to have this set to "1" at all times. Additionally, we recommend that this be set to "1" while pilots are connected to other ATC networks, such as VATSIM or IVAO.
Settable: Yes
L:SIAI_COPILOT
Description: Will be set to 1 if the co-pilot is currently in charge of the comms, and 0 if the pilot is in charge of the comms.
Settable: Yes
L:SIAI_COM1_RECEIVING
Description: Will be set to 1 if the COM2 radio is currently playing audio / receiving a message.
Settable: Read-Only
L:SIAI_COM2_RECEIVING
Description: Will be set to 1 if the COM1 radio is currently playing audio / receiving a message.
Settable: Read-Only
K:COM1_VOLUME_SET
Description: INT range 0 to 100 (in percent) for the volume of the COM1 radio.
Settable: Yes
K:COM2_VOLUME_SET
Description: INT range 0 to 100 (in percent) for the volume of the COM1 radio.
Settable: Yes
K:AUDIO_PANEL_VOLUME_SET
Description: INT range 0 to 100 (in percent) for the volume of the Intercom radio.
Settable: Yes
L:SIAI_AUDIO_PANEL2_VOLUME_SET
Description: INT range 0 to 100 (in percent) for the volume of the Intercom radio.
Settable: Yes
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article